missyou 3D hologram fan
$159.00
Protective cover only — hologram fan and display stand not included.
Clear acrylic panels form a physical barrier around a compatible hologram fan while keeping the display visible. Choose the correct square cover size for your indoor display.
All square cover sizes use nominal 5 mm acrylic panels and 20 cm side panels. The accessory set is the same across sizes; panel dimensions vary with the selected size.
Available options: 46 cm, 56 cm, 70 cm, 85 cm and 100 cm. These labels refer to fan blade-diameter options, not the external dimensions of the cover. Check the selected option, mounting holes and installation clearance before ordering.
| Cover option | Maximum fan blade diameter | Approximate inches |
|---|---|---|
| 46 cm | 46 cm or smaller | 18.1 in |
| 56 cm | 56 cm or smaller | 22.0 in |
| 70 cm | 70 cm or smaller | 27.6 in |
| 85 cm | 85 cm or smaller | 33.5 in |
| 100 cm | 100 cm or smaller | 39.4 in |
These values are blade-diameter limits, not cover-panel or shipping-package dimensions. Diameter alone does not establish compatibility: also check the fan mount, motor depth and blade clearance. For a fan above the selected limit, choose a separately verified larger cover.
Choose the 46 cm option for compatible 32 cm, 42 cm and 46 cm fans. The blade diameter must not exceed 46 cm (approximately 18.1 inches). Check mounting-hole alignment, motor depth and blade clearance; diameter alone does not establish compatibility.
The 56 cm option is for compatible fans with a blade diameter of 56 cm or below (approximately 22 inches), including smaller 50–52 cm fans when the mounting method and clearance match. It is not suitable for 60 cm fans.
The 70 cm option is for hologram fans with a blade diameter of 70 cm (approximately 27.6 inches) or smaller. For fans larger than 70 cm, choose a larger cover. Outer cover dimensions: 72 × 72 × 20 cm. Check mounting-hole alignment and installation clearance before assembly.
The 85 cm option is for compatible hologram fans with a blade diameter of 85 cm (approximately 33.5 inches) or smaller. Each square main panel has an edge length of 89 cm; side panels are 20 cm and nominal acrylic thickness is 5 mm. Panel size is not the usable blade clearance or shipping package size. Check the complete fan dimensions, mounting method and clearance before ordering. For fans larger than 85 cm, choose a separately verified larger cover.
The 100 cm option is for compatible hologram fans with a blade diameter of 100 cm (approximately 39.4 inches) or smaller. Each square main panel has an edge length of 104 cm; side panels are 20 cm and nominal acrylic thickness is 5 mm. Panel size is not the usable blade clearance or shipping package size. Check the complete fan dimensions, mounting-hole alignment and installation clearance before ordering. Fans larger than 100 cm require a separately verified larger cover.
If unsure, send us your fan brand, model and installation photos before ordering. Fans with the same advertised diameter may use different mounts.
An acrylic protective cover kit in your selected size. The hologram fan and display stand shown in reference images are not included. The same accessory set is supplied across cover sizes: base-mounting screws and nuts, panel connectors, straight connectors, assembly screws, round pads, a screwdriver and gloves. Follow the instructions for your exact cover and mount.
Assembly is required. Follow the instructions for your exact cover and mounting method. Switch off and disconnect power before installation or opening, and wait until the blades have stopped. Keep the cover closed during operation.
If blades contact a panel or fastener, stop using the device and contact us. Do not modify blades or fasteners. This cover alone does not establish a waterproof or outdoor-use rating.
Orders dispatch within 3 business days. Shipping charges are calculated at checkout for your destination.
For your selected cover size, US Amazon-warehouse dispatch depends on available stock and destination eligibility. Check the shipping options and charges shown at checkout; a US warehouse does not mean every size or destination is eligible for US dispatch.
If US dispatch is not available for your selected size or destination, contact us to confirm China-shipping availability, charges and delivery timing before ordering. Do not assume an automatic warehouse change.
Delivery estimates are not guaranteed and depend on destination and customs. Warehouse location does not mean every country is served from that warehouse.
No. This listing is for the protective cover kit only.
No. Choose a separately verified suitable cover instead.
No. The blade diameter must not exceed 70 cm. Choose a larger cover for larger fans.
Not necessarily. Check the complete device, mount, rear holes and blade clearance before purchase.
This cover alone does not provide an outdoor or waterproof rating. Follow the approved use conditions for your fan.
Request a custom project plan for larger displays or wholesale quantities.
Contact us before ordering. For general questions, visit the Hologram Fan Community. Do not post private order, address or payment information publicly.
missyou 3D hologram fan
$159.00
For this cover option, the fan's blade diameter must not exceed 46 cm (18.1 in). Larger fans need a larger cover. Check mounting-hole alignment, motor/base depth and blade clearance before ordering. Protective cover only; hologram fan and stand not included.
For this cover option, the fan's blade diameter must not exceed 56 cm (22 in). Larger fans need a larger cover. Check mounting-hole alignment, motor/base depth and blade clearance before ordering. Protective cover only; hologram fan and stand not included.
For this cover option, the fan's blade diameter must not exceed 70 cm (27.6 in). Larger fans need a larger cover. Check mounting-hole alignment, motor/base depth and blade clearance before ordering. Protective cover only; hologram fan and stand not included.
For this cover option, the fan's blade diameter must not exceed 85 cm (33.5 in). Larger fans need a larger cover. Check mounting-hole alignment, motor/base depth and blade clearance before ordering. Protective cover only; hologram fan and stand not included.
For this cover option, the fan's blade diameter must not exceed 100 cm (39.4 in). Larger fans need a larger cover. Check mounting-hole alignment, motor/base depth and blade clearance before ordering. Protective cover only; hologram fan and stand not included.
Protective cover kit only; hologram fan not included. For blade diameters up to 70 cm (27.6 in). Larger fans need a larger cover. Check mounting holes and blade clearance before installation.
Acrylic cover panels, straight-in connectors, cover assembly screws, round pads, screwdriver and gloves. Screws and nuts for securing the fan mounting base are also included.
Hologram fan and display stand are not included. Match the supplied mounting hardware to your fan base and check alignment and blade clearance before installation.
Compare your fan base with the mounting diagram. All measurements are center-to-center: central four holes 35 × 35 mm, vertical pair 20 mm, horizontal slot centers 60 mm, and upper pair 100 mm. Use only the holes that match your base; not every hole is required. Matching blade diameter alone does not confirm fit. Check motor/base depth and clearance from panels and fasteners before installation. If unsure, contact us with your fan model and a photo of its mounting base before ordering.
Wholesale & Project Orders
Planning a multi-unit, multi-fan or custom installation? Request a tailored project quote.
Shipping Information
Shipping origin and delivery time vary by product, selected variant and destination. Some verified North American FBA variants may ship from Amazon fulfillment centers in the United States. Custom, multi-fan and made-to-order products are quoted separately. Confirm the selected variant before ordering.
$159.00
$159.00
Protective cover only — hologram fan and display stand not included.
Clear acrylic panels form a physical barrier around a compatible hologram fan while keeping the display visible. Choose the correct square cover size for your indoor display.
All square cover sizes use nominal 5 mm acrylic panels and 20 cm side panels. The accessory set is the same across sizes; panel dimensions vary with the selected size.
Available options: 46 cm, 56 cm, 70 cm, 85 cm and 100 cm. These labels refer to fan blade-diameter options, not the external dimensions of the cover. Check the selected option, mounting holes and installation clearance before ordering.
| Cover option | Maximum fan blade diameter | Approximate inches |
|---|---|---|
| 46 cm | 46 cm or smaller | 18.1 in |
| 56 cm | 56 cm or smaller | 22.0 in |
| 70 cm | 70 cm or smaller | 27.6 in |
| 85 cm | 85 cm or smaller | 33.5 in |
| 100 cm | 100 cm or smaller | 39.4 in |
These values are blade-diameter limits, not cover-panel or shipping-package dimensions. Diameter alone does not establish compatibility: also check the fan mount, motor depth and blade clearance. For a fan above the selected limit, choose a separately verified larger cover.
Choose the 46 cm option for compatible 32 cm, 42 cm and 46 cm fans. The blade diameter must not exceed 46 cm (approximately 18.1 inches). Check mounting-hole alignment, motor depth and blade clearance; diameter alone does not establish compatibility.
The 56 cm option is for compatible fans with a blade diameter of 56 cm or below (approximately 22 inches), including smaller 50–52 cm fans when the mounting method and clearance match. It is not suitable for 60 cm fans.
The 70 cm option is for hologram fans with a blade diameter of 70 cm (approximately 27.6 inches) or smaller. For fans larger than 70 cm, choose a larger cover. Outer cover dimensions: 72 × 72 × 20 cm. Check mounting-hole alignment and installation clearance before assembly.
The 85 cm option is for compatible hologram fans with a blade diameter of 85 cm (approximately 33.5 inches) or smaller. Each square main panel has an edge length of 89 cm; side panels are 20 cm and nominal acrylic thickness is 5 mm. Panel size is not the usable blade clearance or shipping package size. Check the complete fan dimensions, mounting method and clearance before ordering. For fans larger than 85 cm, choose a separately verified larger cover.
The 100 cm option is for compatible hologram fans with a blade diameter of 100 cm (approximately 39.4 inches) or smaller. Each square main panel has an edge length of 104 cm; side panels are 20 cm and nominal acrylic thickness is 5 mm. Panel size is not the usable blade clearance or shipping package size. Check the complete fan dimensions, mounting-hole alignment and installation clearance before ordering. Fans larger than 100 cm require a separately verified larger cover.
If unsure, send us your fan brand, model and installation photos before ordering. Fans with the same advertised diameter may use different mounts.
An acrylic protective cover kit in your selected size. The hologram fan and display stand shown in reference images are not included. The same accessory set is supplied across cover sizes: base-mounting screws and nuts, panel connectors, straight connectors, assembly screws, round pads, a screwdriver and gloves. Follow the instructions for your exact cover and mount.
Assembly is required. Follow the instructions for your exact cover and mounting method. Switch off and disconnect power before installation or opening, and wait until the blades have stopped. Keep the cover closed during operation.
If blades contact a panel or fastener, stop using the device and contact us. Do not modify blades or fasteners. This cover alone does not establish a waterproof or outdoor-use rating.
Orders dispatch within 3 business days. Shipping charges are calculated at checkout for your destination.
For your selected cover size, US Amazon-warehouse dispatch depends on available stock and destination eligibility. Check the shipping options and charges shown at checkout; a US warehouse does not mean every size or destination is eligible for US dispatch.
If US dispatch is not available for your selected size or destination, contact us to confirm China-shipping availability, charges and delivery timing before ordering. Do not assume an automatic warehouse change.
Delivery estimates are not guaranteed and depend on destination and customs. Warehouse location does not mean every country is served from that warehouse.
No. This listing is for the protective cover kit only.
No. Choose a separately verified suitable cover instead.
No. The blade diameter must not exceed 70 cm. Choose a larger cover for larger fans.
Not necessarily. Check the complete device, mount, rear holes and blade clearance before purchase.
This cover alone does not provide an outdoor or waterproof rating. Follow the approved use conditions for your fan.
Request a custom project plan for larger displays or wholesale quantities.
Contact us before ordering. For general questions, visit the Hologram Fan Community. Do not post private order, address or payment information publicly.
